Skip to main content

Featured Articlce

The Future of 3D Printing and Healthcare

When it comes to 3D printing, the sky is the limit. As 3D printing technology continues to advance, applications can be as far reaching as  airplane  and  automobile parts  to medical devices and even anatomically correct, biocompatible models. Although 3D printing technology is developing at a rapid pace, the technology itself is not new. It emerged in  the 1980s  as a means of creating rapid prototypes. In recent years the applications for 3D printed models have evolved with the available hardware, software, and printable materials. Evolving technology, paired with the creative and innovative minds of scientists, engineers, and physicians, has been the launching pad for developments within 3D printing technology specific to healthcare. One way 3D printing technology is poised to create better patient outcomes is in creating an anatomically and  patient-specific models  to aid in surgery and medical procedures. With the capability to 3D ...

New Polymer Biomaterial Advances Wound and Burn Healing

Bandages are great for standard cuts and scrapes. However, when you get a cut in an area that’s not so easy to bandage — for example, between your fingers or toes — finding a bandage that will stay in place to protect the wound is serious business. New solutions require medical device testing.
Yosuke Okamura, Ph.D., had a solution to this problem in mind when he created a new kind of bandage. The new design uses ultra-thin, transparent, sticky, and extraordinarily flexible nanosheets made of the biodegradable polyester poly-L-lactic acid (PLLA). The thin coating clings to bends and wrinkles in the skin while still adhering to flat and broad surfaces. It does this without the addition of adhesives, making it an ideal bandage for any type of wound.
“The nanosheets can adhere not only to flat surfaces, but also to uneven and irregular surfaces without adding any adhesives,” said Okamura, a researcher at the Department of Life Science and Medical Bioscience Graduate School of Advanced Science and Engineering at Waseda University in Japan.
Screen shot2 2014-08-12 at 1.36.23 PMThe PLLA is placed into a test tube with water and spun, disrupting the sheets and creating smaller pieces. The liquid and fiber are then poured out onto a flat surface where the fibers overlap and dry to form a thin nanosheet of material. The material’s ability to coat small and difficult contours was tested by dipping into the preparation irregularly shaped objects such as a needle and the digits from a mouse paw. The nanosheet covered each of the objects extensively, including the bends and wrinkles of the mouse digits. The material dried and stayed in place, keeping bacteria out.

But Wait, There’s More…

This discovery can change the way burn victims are cared for in hospitals. Burns are highly susceptible to infection. In order for a burn to heal properly, the bandage must be impenetrable to bacteria. The most common bacteria to infect a burn wound is Pseudomonas aeruginosa. It has also been known to cause skin infections and deadly hospital-induced infections. There are antibiotic-resistant strains that are very dangerous.
The nanosheet dressing was able to keep bacteria at bay for three days. Upon application of a second layer, the bacteria was kept out for six days. This level of protection from bacteria would significantly cut down on the number of dressing changes a burn patient will have to endure. It will also offer burn victims a chance to heal without the added worry of infection slowing the process or causing harm. The material has not yet been approved for human trials pending further medical testing for safety and efficacy.

And Even More…

The PLLA nanosheets are just the beginning. Okamura and his group have begun development on another highly flexible, fiber coating polymer with a phosphorylcholine group. The combined materials are compatible with blood and could be used as coatings on medical devices.
Thanks to the wonderful world of polymers, in the future those annoying cuts in hard-to-cover places or a burn from the grill will be covered completely, and nasty bacteria will be kept out.

Comments

Popular posts from this blog

The Future of 3D Printing and Healthcare

When it comes to 3D printing, the sky is the limit. As 3D printing technology continues to advance, applications can be as far reaching as  airplane  and  automobile parts  to medical devices and even anatomically correct, biocompatible models. Although 3D printing technology is developing at a rapid pace, the technology itself is not new. It emerged in  the 1980s  as a means of creating rapid prototypes. In recent years the applications for 3D printed models have evolved with the available hardware, software, and printable materials. Evolving technology, paired with the creative and innovative minds of scientists, engineers, and physicians, has been the launching pad for developments within 3D printing technology specific to healthcare. One way 3D printing technology is poised to create better patient outcomes is in creating an anatomically and  patient-specific models  to aid in surgery and medical procedures. With the capability to 3D ...

Virginia Tech Students Create Foldable Bike Helmets

Helmets: Something you may have hated with a passion as a child, but your parents made you wear. As adults, one could argue helmet use is pretty divided. If you head down your local bike path or along a neighborhood street, you’ll see a good number of riders not wearing their helmets. Two Virginia Tech students think that’s a problem. Co-founders David Hall and Jordan Klein started  Park & Diamond  and set out to create a safe, compact, and stylish helmet to hopefully convince people to wear them every time they bike. The interest in refining technology to prevent bike related head injuries is  incredibly personal  for the team of innovators, especially for Hall. In 2015 Hall’s younger sister was involved in a bike accident in Philadelphia and remained in a coma for four months. The bicycle crash occurred at the corner of Park Avenue and Diamond Street in Philadelphia—which is reflected in the name of their company. How Helmets Work Just like the...

NakeFit | A Polymer Innovation for Feet

It’s summertime — have you been able to enjoy the feeling of sand between your toes as you take in the crashing waves? Walking barefoot on the beach can be a freeing feeling — well, that is until you step on a sharp shell! One new innovation, utilizing adhesive technology, aims to allow you the freedom of sand between your toes while simultaneously protecting the soles of your feet: NakeFit. NakeFit  is an adhesive sole that fits on the bottom of your foot and allows you all the advantages of going barefoot without the risks or lack of comfort. We aren’t surprised to see a product like this come to market when we regularly hear about  barefoot running . We do, however, want to explore this neat product concept and tell you a little more about the science behind a product like this! What ARE they? We’ll admit, a lot of what made us ask questions about this product is the strangeness of it. Every other “shoe” (is this even a shoe?) has straps, buckles, ...